Raritan DOMINION DSX-0N-E Bedienungsanleitung PDF herunterladen

For more detailed instructions, please consult the User Guide found on the enclosed CD-ROM. Rev. G April 2007 255-60-2010-00

What You’ve Got

CheckthecontentsofthecartoncontainingtheDSX.

Thisiswhatyoushouldhave:

•DSXunit

• Rackmountkit

•1or2powercords(dependingontheDSXmodel)

•RJ‐45adapter(forloopbacktestingofconsole

ports)

•CD‐ROMandwarrantycard

Ifanypieceismissingordamaged,contactyour

Raritan

salesrepresentativeimmediately.

What Else You’ll Need

Inadditiontotheequipmentinthecarton,youwill

need:

•1crossoverEthernetcabletoconfiguretheDSX

throughabrowser‐basedinterface,or

•1nullmodemcabletoconfiguretheDSXthrougha

commandlineinterface,and

• Enoughcablestoconnectyourmanageddevicesto

theDSX.Refertothe

RaritanPricebookforthe

typesofcablesneededforeachtypeofdeviceyou

intendtoconnect.

Factory Defaults

TheDSXunitisshippedfromthefactorywiththe

followingdefaultsettingsbuiltin:

Connect the Target Devices

TheDSXcomesinavarietyofmodels.Themodel

shownabovecontainstwopoweroutlets,oneLAN

interface,and32consoleports.Yourmodelmaydiffer,

Setting Default

IPaddress 192.168.0.192

Subnetmask 255.255.255.0

Gateway 192.168.0.192

Username admin(alllowercase)

Password raritan(alllowercase)

Unitname DominionSX

butthiswillnotaffectthefollowinginstallation

instructions.

1. InstalltheDSXinyourchosenlocation.Rack

mountingisrecommendedbutnotrequired.

2. Connectthepowercordtothepowerconnectoron

theDSXandtoanexternalpowersource.Ifyour

unithastwopowerconnectors,youcanconnect

thesecond

powerconnectortoabackuppower

source.

3. FlipthepowerswitchtoturntheDSXuniton.The

unitperformsahardwareandfirmwareselftest.

Thesoftwarebootsequencestartsandiscomplete

whenthelightgoesonandremainson.

4. Connectyourtargetserversorotherserially

manageddevices

totheconsoleportsontheDSX.

a. ConnectoneendofastandardCat5Ethernet

cabletooneoftheconsoleportsontheDSX.

b. ConnecttheotherendtoaRaritanNulling

SerialAdapter(p/nASCSDB9F,ASCSDB9M,

ASCSDB25F,ASCSDB25M)asappropriate.

c. Connecttheadaptertotheconsoleportonthe

target

device

Important Note: ManyCiscoandSundeviceshave

consoleportswithnon‐standardRJ‐45connections.

MostcanbeconnectedtotheDSXwitha“serial

rollovercable.”ThisisNOTastandardEthernetcable

orcrossoverEthernetcable.Ifyouhavemisplacedthe

rollovercablethatcamewithyourCiscoorSun

device,

youcanpurchaseonefromRaritan(p/nCRLVR‐15).

Configure the DSX Using a Browser

YoucanconfiguretheDSXusingaWebbrowserora

commandlineinterface(CLI).IfyoupreferaCLI,skip

thissectionandproceeddirectlytothenextsection.

1. ConnectacomputertotheLANinterfaceonthe 

DSXusingacrossoverEtherne tcable.IfyourDSX

hastwoLAN

interfaces,useLAN1.

2. MakesurethecomputerhasaroutetotheDSX’s

defaultIPaddress(192.168.0.192).Openaconsole

windowandenterthe

route printcommand.If

thedefaultIPaddressisNOTontheActiveRoutes

list,dothefollowing:

a. OnaWindowsmachine,type

ipconfigand

noteyourIPaddress.Thentype:

route add 192.168.0.192 <installation

computer IP address>

b. OnaUnixorLinuxmachine,typeifconfig

andnoteyourIPaddress.Thentype:

route add 192.168.0.192 <installation

computer IP address> -interface

c. Type:

ping 192.168.0.192

Thisshouldproduceareply.Ifitdoesnot,

checkthephysicalconnectionbetweenthe

computerandtheDSX,andmakesureyou

executedthe

route addcommandcorrectly.

3. OpenabrowserandenterthisURL:

http://192.168.0.192

4. WhentheLoginwindowappears,enterthedefault

username(admin)andpassword(raritan).Useall

lowercaseletters.

5. Youwillbepromptedtochangethedefault

password.Dosonow,andthenloginagainusing

thenewpassword.Besuretorememberthis

password.

6. ClicktheSetuptab,andthen

clickNetwork.

Networkcanbe foundundertheConfiguration

header.

7. IntheNetworkBasicSettingspanel,givetheDSX

anIPaddress,subnetmask,andgatewayaddress

onyourLAN.Youcanalsogivetheunitanameto

helpidentifyit(upto64characters,spacesand

specialcharacters

notallowed)andenteryour

domain(requiredtosendSMTPmessages).

8. TheDSXwillnowreboot.Oncetherebootis

complete,loginagainusingyournewpassword.

Dominion SX Quick Setup Guide

Power on/off

switch

Power

connectors

LAN interface

Terminal port

Console ports

1 2

Inhaltsverzeichnis

Seite 1 - Dominion SX Quick Setup Guide

For more detailed instructions, please consult the User Guide found on the enclosed CD-ROM. Rev. G April 2007 255-60-2010-00What You’ve GotCheckthec

Seite 2 - What to Do Next

Dominion SX Quick Setup Guide (Cont.)9. ClicktheSetuptab,andthenclickDate/Time.Date/TimeisfoundundertheConfigurationheader.a. Selectyou