Raritan P2-USTIP1 Bedienungsanleitung PDF herunterladen (Seite 48)

40 PARAGON II USER MANUAL

Channel Configuration

As administrator, use the Channel Configuration Menu to edit or initialize a P2CIM-PS2. You can change

the device name, individual scan rate, device type, and group IDs associated with each server or device.

When you save Channel Configuration changes, Paragon II will update each affected P2CIM-PS2 as

necessary.

Figure 39 Left panel of the Channel Configuration Menu

This menu displays one channel port’s information in each row. If the Paragon system detects a powered

device on that channel port, it will display the text in that row in green; otherwise, it will display it in black.

Again, there are two panels in this menu, indicated by the right-pointing arrow at the top of the menu. The

fields and columns on the left panel of this menu:

• ChID: The channel port’s channel port-ID number.

• Name: The name of the device attached to that channel port. Device names are case-sensitive and may

be up to twelve alphanumeric characters long. As shown with channel port #1 in and elsewhere, you

may leave a device name blank if you wish, but Raritan does not recommend this.

• Scn: Displays the device’s individual scan rate (the length of time that the system pauses while

scanning that channel port for any user with Scan Mode set to “Individual” rather than “Global”).

Using leading zeroes if necessary, type in a two-digit number of seconds from 01 to 24, or use the up-

and down-arrow keys to increment and decrement the current value by 1 respectively. The default

setting is 03.

Use the arrow keys, Tab, Shift + Tab, PgUp (page up), PgDn (page down), Home, and End to move

within this menu and its submenus. Press the Enter key to edit a highlighted field; it will turn green. When

you finish editing a field, press either the Enter key followed by S to save the changes, or press the Esc key

to abort them.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 109 110

Keine Kommentare

Raritan P2-USTIP1 Bedienungsanleitung Seite 48