Raritan DOMINION SX - Einstellungsanleitung PDF herunterladen

Dominion

Quick Installation and Setup Guide

For more detailed instructions, please consult the User Manual found on the enclosed CD-ROM. Rev. D June 2005 255-60-2010

Physical Installation

(see illustration above, right)

1. Obtain a computer with a net-

work card and crossover network

cable. This computer will be

referred to as the 'installation com-

puter.'

2. Physically mount the unit in an

ergonomically sound manner. The

unit is designed to be easily rack-

mounted, and rack mounting is rec-

ommended.

3. Connect the crossover network

LAN cable to the primary LAN con-

nection on the back of the chassis.

Connect the other end to the net-

work card in the installation comput-

er.

4. Connect the female end of the

external power cord to the back of

the chassis.

5. Connect the male end of the

external power cord to the power

supply outlet.

6. Power ON the Dominion SX

unit.

NNoottee::

The unit will perform a hard-

ware and firmware self-test and then

start the software boot sequence.

The boot sequence is complete

when the light goes on and remains

on.

Each unit comes with a certain set

of configuration defaults henceforth

referred to as

FFaaccttoorryy RReesseett MMooddee..

The default network settings for this

mode are:

Internet Address (IP): 192.168.0.192

Gateway Address: 192.168.0.192

Subnet Mask: 255.255.255.0

Port Address: 51000

Username: admin

Password: raritan

A. Java-enabled System

Configuration for DSX

Ensure that your installation comput-

er has a route to and can communi-

cate with IP address

119922..116688..00..119922

by entering the command

rroouuttee

pprriinntt

on the command line interface

of the installation computer.

If 192.168.0.192 is not on the gate-

way list, add it to the gateway list by

typing the following commands into

either a DOS or UNIX command line

interface on the installation comput-

er where your browser is running.

On a Windows NT/95/98/2000 sys-

tem, type:

rroouuttee aadddd 119922..116688..00..119922

<<cclliieenntt__hhoosstt IIPP aaddddrreessss>>

For example:

rroouuttee aadddd 119922..116688..00..119922 1155..112288..112222..1122

On a UNIX (incl. Sun Solaris) system, type:

rroouuttee aadddd 119922..116688..00..119922 <<cclliieenntt__hhoosstt IIPP

aaddddrreessss>> --iinntteerrffaaccee

For example:

rroouuttee aadddd 119922..116688..00..119922 1155..112288..112222..1122 --

iinntteerrffaaccee

On the command line interface, type:

ppiinngg

119922..116688..00..119922..

If this does not produce a reply, please verify

that:

- The Dominion SX unit is powered on and has

completed the self-test

- It has a crossover Ethernet cable connected to

it from the installation computer (or a straight-

through cable from a known-good port on a

hub, switch, or router)

- The correct IP address was entered into the

URL on a Java-enabled browser

- There is route from the installation computer to

the Dominion SX.

Use the installation computer to connect to the

unit, typing the factory default IP address

119922..116688..00..119922

in the installation computer Web

browser's address line. Once you have reached

the unit's initial configuration screen, enter the

Initial Software Configuration information as

described below.

User Information

This information should be entered for each

user, up to 50 user accounts, with at least one

administrator for each Dominion SX unit.

UUsseerr NNaammee::

32 characters maximum, one char-

acter minimum, spaces permitted.

LLooggiinn NNaammee::

20 characters maximum, one char-

acter minimum, no spaces.

UUsseerr TTyyppee::

AAddmmiinniissttrraattoorr

: Can modify configuration of the

unit, has read/write access to the console win-

dow.

OOppeerraattoorr

: Cannot modify configuration of the

unit (except own password), has read/write

access to the console window.

OObbsseerrvveerr

: Cannot modify configuration of the

unit (except own password), has read-only

access to the console window.

IInnffoorrmmaattiioonn::

Any additional information (text)

you want associated with this user. Can be 64

characters maximum, no minimum, spaces per-

mitted.

PPaasssswwoorrdd::

Alphanumeric text, 6-16 characters

in length, no spaces. The first six characters of

the password must contain at least two alphas

and one numeric character; the first four char-

acters cannot be the same as the user name.

Once configured, the Dominion unit will auto-

matically reboot. The unit will now be operating

at its newly assigned IP address. If the unit is

not yet mounted in the final installation location,

the unit can be powered down and disconnect-

ed from the AC/DC power source (mains) and

then relocated to its place in the rack or equip-

ment shelf.

To communicate with the unit, please use a

JJaavvaa--eennaabblleedd bbrroowwsseerr,,

and enter the unit's new

IP address. Use the newly created Administrator

Username and Password to access the unit,

add users, and configure ports for access via

the Dominion SX.

Also, at this time, it is important to verify/correct

the Time and Date settings for the unit (under

the

TTiimmee

tab), since all log entries rely on this

information.

Configure the ports, using the information

below, for secure console access. Set up the

user profile for the specific ports each specific

user is authorized to access.

All Servers

11..

Note the communication settings for the

console port on each server that is to be con-

nected to the Dominion SX. These will include

baud/bit rate, typically 9600bps to 115.2Kbps,

parity, flow-control; hardware (CTS/RTS) or soft-

ware (XON/XOFF).

22..

Ensure that you have the right cabling, and

in some cases, adapters, to connect the server

to the Dominion SX serial port.

33..

Ensure that the console port is enabled on

the server to be connected to the Dominion SX.

44..

Ensure that the server supports - and con-

sole is set for - VT100 emulation. Default code-

set for Raritan's terminal emulation package,

RaritanConsole is US ASCII; alternatively,

RaritanConsole can be set for ISO 8859-1 or

ISO 8859-15.

Network / Firewall

In order to enable access to Dominion SX, your

network and firewall must allow communication

on TCP Port 51000.

Dominion SX can be configured to use a differ-

ent TCP port of your own designation (from

1024-65536).

To access Dominion SX via web browser, your

firewall must also allow access to TCP Port 443

(Standard HTTPS). You may also wish to allow

access to TCP Port 80 (Standard for HTTP) for

additional convenience; because Dominion SX

will forward all HTTP requests to HTTPS.

Allowing the initial HTTP requests on TCP Port

80 usually reduces complication for users

(users may initiate the connection with either

"http" - unit will automatically switch to "https" - or

"https" as a URL).

B. Command Line Interface System

Configuration for DSX

As of release 2.5, you can use a Command Line

Interface (CLI) or a Web browser for basic net-

working setup and configuration.

1. Connect the Dominion SX unit to power, AC

or DC, depending on the unit. For DC models,

cabling is customer-provided.

2. Power ON the unit.

3. Connect a VT100 terminal (or equivalent)

to the Terminal (or Terminal/Reserved on some

models) serial port. This port is a DB9-Male port

on most models, except ALL dual-power dual-

LAN models, including DSXA-48, which have an

RJ45 connector for a terminal port.

4. The cabling required varies depending on

the terminal used for this initial configuration;

maximum length is 50 feet at 9600bps. Without

the correct cabling, it is impossible to communi-

cate with the Dominion SX.

a. PC with serial port using Windows

with HyperTerminal (or equivalent communica-

tions package): DB9-F (female) to DB9-F serial

cable OR RJ45 male to DB9-F serial cable

(RJ45 male end plugs into the Dominion SX)

b. PC with serial port using Linux operat-

ing system and Minicom (or equivalent) com-

munications package: DB9-F (female) to DB9-F

serial cable OR RJ45 male to DB9-F serial cable

(RJ45 male end plugs into the Dominion SX)

((ccoonnttiinnuueedd,, oovveerr))

II. Physical Installation and Initial Configuration

There are two ways to complete the basic network installation of the Dominion SX 1) Using a Java enabled web-brows-

er and Ethernet cable - see

IIII,, AA:: JJaavvaa eennaabblleedd SSyysstteemm CCoonnffiigguurraattiioonn ffoorr DDSSXX

or 2) Using a VT100 terminal or equivalent

setup, such as a communications package like HyperTerminal/Minicom or equivalent and a serial cable - see

IIII,, BB::

CCoommmmaanndd LLiinnee IInntteerrffaaccee SSyysstteemm CCoonnffiigguurraattiioonn ffoorr DDSSXX..

DDoommiinniioonn SSXX88

DDoommiinniioonn SSXX3322

I. Prepare Devices and Network for Remote Operation

Congratulations on your purchase of Dominion SX, the complete solution for secure console management. Before

installing Dominion SX, first configure each device that you intend to access remotely with the following parameters.

This very important installation procedure ensures a smooth installation.

Pre-installation

Have the right cabling on-hand to

connect to the serial consoles of the

target server(s) or other serially-

managed devices that provide a

console port. See section III,

AAttttaacchhiinngg SSeerrvveerrss oorr ootthheerr sseerriiaallllyy--

mmaannaaggeedd ddeevviicceess ttoo tthhee DDoommiinniioonn

SSXX

The following list,

NNeettwwoorrkk

IInnffoorrmmaattiioonn

, outlines required infor-

mation for your Dominion SX unit.

We recommend that you obtain all

required information prior to per-

forming the configuration steps out-

lined in this guide. If you are uncer-

tain of any information, contact your

system administrator for assistance.

We recommend you store this infor-

mation in a secure location for future

reference.

Network Information

RRaarriittaann UUnniitt NNaammee::

A generic name

or term for your Dominion SX unit -

maximum 64 characters (under-

scores are permitted), no minimum

size, and no spaces.

IIPP AAddddrreessss::

The IP address of the

unit, as directed by your network

administrator.

IIPP SSuubbnneett MMaasskk::

The IP subnet

mask for the unit, as directed by

your network administrator.

IIPP GGaatteewwaayy::

The IP gateway for the

unit, as directed by your network

administrator.

PPoorrtt AAddddrreessss::

Port 51000 (default)

or any port number from 1024 to

65536, as directed by your network

administrator.

DDoommaaiinn NNaammee::

Your domain name,

ex: mycompany.com or mycompa-

ny.co.uk.

[Optional]

PPoorrtt ffoorr CCoommmmaannddCCeenntteerr

((CCCC)) ddiissccoovveerryy::

not required for a

standalone installation of Dominion

SX. If you are going to manage this

Dominion SX unit using Raritan's

CC, leave this port number set at

the default value of 5000, or set it to

the port number specified by the

administrator. In rare cases another

device may be using port 5000 as

its default broadcast (or discovery)

port.

PPhhyyssiiccaall IInnssttaallllaattiioonn DDiiaaggrraamm

1 2

Dominion 1

Inhaltsverzeichnis

Seite 1 - Dominion

Dominion®SX Quick Installation and Setup GuideFor more detailed instructions, please consult the User Manual found on the enclosed CD-ROM. Rev. D

Seite 2

Dominion®SXQuick Installation and Setup Guide((ccoonnttiinnuueedd ffrroomm ootthheerr ssiiddee))c. Another device with an asyn-chronous RS232 commu

Weitere Dokumente für PC / Workstation Barebones Raritan DOMINION SX -

Um das Dokument anzuzeigen Raritan DOMINION SX - Spezifikationen

Raritan DOMINION SX - Spezifikationen (178 Seiten)

Raritan DOMINION SX - Spezifikationen (9 Seiten)

Um das Dokument anzuzeigen Raritan DOMINION SX - Bedienungsanleitung

Raritan DOMINION SX - Bedienungsanleitung (3 Seiten)

Um das Dokument anzuzeigen Raritan DOMINION SX - Betriebsanweisung

Raritan DOMINION SX - Betriebsanweisung (334 Seiten)

Raritan DOMINION SX - Betriebsanweisung (311 Seiten)

Um das Dokument anzuzeigen Raritan DOMINION SX - Einstellungsanleitung

Raritan DOMINION SX - Einstellungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Raritan DOMINION SX - Einstellungsanleitung

Stöbern Sie online oder laden Sie Einstellungsanleitung nach PC / Workstation Barebones Raritan DOMINION SX - herunter. Raritan DOMINION SX - Setup guide Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für PC / Workstation Barebones Raritan DOMINION SX -

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones Raritan DOMINION SX -